STM3220Z-CRE/UET BOARD
Description:
The STM3220Z-CRE/UET board has been designed as a complete demonstration and development platform for the ARM cortex-M3 core-based STM32F207ZGT6 microcontroller. It features three I2Cs, three SPIs, six USARTs, two CANs, three 12-bit ADCs, two 12-bit DACs, internal 128-KByte Data SRAM and 1024-KByte Flash, USB FS, JTAG debugging support. This evaluation board can be used as the reference design for user application development but it is not considered as a final application. With the JTAG interface you can use debugger STLINKIII or JLINKV8 to test your program.
Features:
l MCU: STM32F207ZGT6 (144pin)
l Core work at up to 120M frequency
l 1024KB Flash and 128KB RAM
l USB Device、SDIO interface
l l 2.8’ TFT LCD
l 1 CAN channel port
l 4 User Leds, 6 User Keys
l 1 Power Key, 1 Reset Key
l 1 Power Led
l 1 DV 5V power interface
l 1 I2C EEPROM 24C02
l 1 SPI FLASH AT45DB161
l 1 AD channel with Pointer
l l RTC with backup battery interface
l 1 camera OV9655 module
l USB OTG FS interface
l l JTAG Debug port
l l ALL I/O expansion
Order NO: STM3220Z-CRE/UET
STM3220Z-CRE/UET开发板是一块基于CORTEX-M3内核的STM32F207ZGT6微处理器的开发平台。STM32F207ZGT6 有3个I2C,3个SPI,6个USART,2路CAN,3个12位ADC转换器，2个12位DAC转换器，内部有128KB的Data SRAM，1024KB的FLASH,支持USB FS和JTAG调试。此评估平台可作为用户应用开发时做参考，而未作最终产品应用考虑。用户可通过JTAG用STLINK或JLINK仿真下载程序。
